Datacenter Advanced Enrichment Actions PowerPack Release Notes, version 107

Version 107 of the "Datacenter Advanced Enrichment Actions" updates device matching and default commands in some run book actions.

  • Minimum Required SL1 Version: 8.10.0

Before You Install

Ensure that you are running version 8.10.0 or later of SL1 before installing "Datacenter Advanced Enrichment Actions" PowerPack version 107.

For details on upgrading SL1, see the relevant SL1 Platform Release Notes.

NOTE:The "Datacenter Advanced Enrichment Actions" PowerPack must be installed last after any Automation PowerPacks have been installed.

Installation Process

If you are currently using the Dynamic Applications in this PowerPack to monitor devices, collection errors might occur for one or two polling cycles during the installation of a new version. To prevent collection errors during an upgrade, you can optionally disable collection for monitored devices before performing the following steps and re-enable collection after the upgrade.

To install this PowerPack:

  1. Search for and download the PowerPack from the PowerPacks page (Product Downloads > PowerPacks & SyncPacks) at the ScienceLogic Support Site.
  2. In SL1, go to the PowerPacks page (System > Manage > PowerPacks).
  3. Click the Actions menu and choose Import PowerPack. The Import PowerPack modal appears.
  4. Click Browse and navigate to the PowerPack file from step 1.
  5. Select the PowerPack file and click Import. The PowerPack Installer modal displays a list of the PowerPack contents.
  6. Click Install. The PowerPack is added to the PowerPack Manager page.

See the Datacenter Advanced Enrichment Actions PowerPacks manual for instructions on using the PowerPack.

Features

This PowerPack contains a set of run book actions that provide a framework for executing SSH and Telnet commands remotely on a variety of devices, and then formatting the result. There are 348 run book actions that build different lists of diagnostic commands to be executed by the framework.

This PowerPack is a prerequisite installation for the Automation Policy PowerPacks or can be used to build custom Automation Policies.

Enhancements and Issues Addressed

The following enhancements and addressed issues are included this release of the "Datacenter Advanced Enrichment Actions" PowerPack:

  1. The regular expression (regex) in the prompts library was updated to match more devices including those with white spaces in the command prompt.
  2. The following run book actions were updated to apply default commands:
  • Enrichment: Cisco: BGP Peer State is Not Established
  • Enrichment: Cisco: Environment Temperature Show Commands
  • Enrichment: Cisco: Environment Show Commands
  • Enrichment: Cisco: FRU Fan Tray not UP
  • Enrichment: Cisco: Interface Reset Count
  • Enrichment: Cisco: IPSLA ECHO RTT Threshold Show Commands
  • Enrichment: Cisco: IPSLA JITTER Threshold Show Commands
  • Enrichment: Cisco: IPSLA Packet Loss Show Commands
  • Enrichment: Cisco: OSPF Neighbor Status is Not Full
  • Enrichment: Cisco: Physical IO Memory Has Exceeded Show Commands
  • Enrichment: Cisco-IOS: FRU Show Environment Power
  • Enrichment: Cisco-IOS: FRU Show Modules
  • Enrichment: Cisco-IOS: Spanning Tree Proto Status Show Commands
  • Enrichment: Cisco-NX: CPU High Show Commands

Known Issues

This release has no known issues.