ServiceNow Events SyncPack Release Notes, version 1.0.1

The "ServiceNow Events SyncPack" version 1.0.1 includes an update that uses custom queues to group multiple events in a payload.

This SyncPack contains a set of PowerFlow applications, steps, and other utilities that you can use with the ServiceNow Events Module. This SyncPack provides a bi-directional sync of SL1 Events with ServiceNow Alerts, including event creation, acknowledgment, and resolution. This SyncPack requires a ServiceNow MID Server.

You should not use the ServiceNow Events SyncPack and the ServiceNow Incident SyncPack on the same PowerFlow system. Also, do not use the Cases and Events SyncPacks on the same PowerFlowsystem.

Features Included in this Release

The following features were included in ServiceNow Events SyncPack version 1.0.1:

  • You can use this SyncPack to create, update, and clear events in ServiceNow when you get an Event in SL1. This feature uses a Run Book Action and a set of Run Book Automations from the ServiceNow Base Pack PowerPack to add, update, and clear events in ServiceNow.

  • This SyncPack uses the "ServiceNow: Add/Update/Clear Event " Run Book Action and the following Run Book Automations from the ServiceNow Base Pack PowerPack:
  • ServiceNow: [Events] - Add/Update
  • ServiceNow: [Events] - Event Acknowledged
  • ServiceNow: [Events] - Event Cleared
  • This SyncPack also syncs any changes or acknowledgments to a ServiceNow Event back to the SL1 Event.
  • This SyncPack sends SL1 Events to ServiceNow using the ServiceNow MID Server endpoint. For more information, see the "Configuring Integrations for the Events SyncPack" chapter in the ServiceNow Events SyncPack manual.
  • You can use the "ServiceNow: [Events] Add/Update" Run Book Automation and the "ServiceNow: Add/Update/Clear Event " Run Book Action to "pass through" custom data from SL1 to ServiceNow. This custom data appears in the additional_details field in ServiceNow.

This SyncPack requires you to download and install the new "ScienceLogic SL1: Event Integration" application version 1.0.0. For more information, see Installing the "ScienceLogic SL1: Event Integration" Application in ServiceNow.

This SyncPack also requires you to download and install the ServiceNow Base PackPowerPack version 103 or later. For more information, see Installing the ServiceNow Base Pack PowerPack in SL1.

The following PowerFlow applications are included with the ServiceNow Events SyncPack:

  • Create Event in ServiceNow from SL1 Event. Transforms SL1 event data into a ServiceNow event, and then posts that event to ServiceNow.

  • Update SL1 Event from ServiceNow Trigger. Updates or clears an SL1 Event based on a ServiceNow action.
  • Update SL1 Events. Updates SL1 events based on the method selected in the configuration

The following steps are included with the SyncPack:

  • Convert ScienceLogic Event Data to SNOW Event
  • Process Event Trigger from ServiceNow

To view release notes and manuals for all versions of the SL1 PowerFlow Platform, see SL1 PowerFlow Platform Documentation. To view release notes and manuals for PowerFlow SyncPacks, see SL1 PowerFlow SyncPack Documentation.

Issues Addressed in this Release

The following issue was addressed in this version of the SyncPack:

  • To better handle groups of Events from ServiceNow, the "ScienceLogic SL1: Event Integration" application uses custom queues to group multiple events in a payload.

Known Issues

The ServiceNow Events SyncPack does not contain any known issues.

System Requirements

The ServiceNow Events SyncPack requires:

  • SL1PowerFlow platform version: 2.0.0 or later.
  • ServiceNow Base SyncPack version: 3.1.0 or later.
  • The "ScienceLogic SL1: Event Integration" application version: 1.0.0.
  • ServiceNow Base Pack PowerPack version: 103 or later
  • SL1 version: 8.12.2 or later. For details on upgrading SL1, see the appropriate SL1 Release Notes.
  • ServiceNow version: New York, Orlando, or Paris with Web Services enabled. A ServiceNow MID Server is also required.

The following table lists the port access required by PowerFlow for this SyncPack:

Source IP PowerFlow Destination PowerFlow Source Port Destination Port Requirement
PowerFlow SL1 API Any TCP 443 SL1 API Access
PowerFlow ServiceNow API Any TCP 443 ServiceNow API Access

Prerequisites for the SyncPack

To install this SyncPack, you must have administrator access to both SL1 and ServiceNow. Specifically, you will need:

  • ScienceLogic administrator access to the Administration Portal
  • ServiceNow administrator access

If you want to upload and install multiple ServiceNow SyncPacks at the same time, you should upload all of the SyncPacks first, and then install them to address any dependencies between the SyncPacks.

ScienceLogic highly recommends that you disable all firewall session-limiting policies. Firewalls will drop HTTPS requests, which results in data loss.

Installing or Upgrading the SyncPack

If you are upgrading to this version of the SyncPack from a previous version, make a note of any settings you made on the various applications in this SyncPack, as these settings are not retained when you upgrade.

If you are installing the SyncPack in an offline deployment, see Installing in an Offline Environment.

A SyncPack file has the .whl file extension type. You can download the SyncPack file from the ScienceLogic Support site.

To locate and download the SyncPack:

  1. Go to the ScienceLogic Support site at https://support.sciencelogic.com/s/.
  2. Click the Product Downloads tab and select PowerPacks.
  3. In the Search PowerPacks field, search for this SyncPack and select it from the search results. The Release Version page appears.
  4. On the Files tab, click the down arrow next to the SyncPack version that you want to install, and select Show File Details. The Release File Details page appears.
  5. Click the Download File button to download the .zip file containing the SyncPack.

After you download a SyncPack, you can import it to the PowerFlow platform using the PowerFlow user interface.

To import a SyncPack in the PowerFlow user interface:

  1. On the SyncPacks page, click Import SyncPack. The Import SyncPack page appears.
  2. Click Browse and select the .whl file for the SyncPack you want to install. You can also drag and drop a .whl file to the Import SyncPack page.
  3. Click Import. PowerFlow registers and uploads the SyncPack. The SyncPack is added to the SyncPacks page.

You cannot edit the content package in a SyncPack published by ScienceLogic. You must make a copy of a ScienceLogic SyncPack and save your changes to the new SyncPack to prevent overwriting any information in the original SyncPack when upgrading.

To activate and install a SyncPack in the PowerFlow user interface:

  1. On the SyncPacks page, click the Actions button () for the SyncPack you want to install and select Activate & Install. The Activate & Install SyncPack modal appears.

    If you try to activate and install a SyncPack that is already activated and installed, you can choose to "force" installation across all the nodes in the PowerFlow system.

    If you do not see the PowerPack that you want to install, click the Filter icon () on the SyncPacks page and select Toggle Inactive SyncPacks to see a list of the imported PowerPacks.

  1. Click Yes to confirm the activation and installation. When the SyncPack is activated, the SyncPacks page displays a green check mark icon for that SyncPack. If the activation or installation failed, then a red exclamation mark icon appears.

  2. For more information about the activation and installation process, click the check mark icon or the exclamation mark icon in the Activated column for that SyncPack. For a successful installation, the "Activate & Install SyncPack" PowerFlow application appears, and you can view the Step Log for the steps. For a failed installation, the Error Logs window appears.
  3. If you have other versions of the same SyncPack on your PowerFlow system, you can click the Actions button () for that SyncPack and select Change active version to activate a different version other than the version that is currently running.

Installing in an Offline Deployment

Use the following procedure if you are installing or upgrading to version 1.0.1 of this SyncPack in an offline deployment.

This release of the SyncPack requires the following external files for an offline deployment:

  • Jinja2-2.11.1-py2.py3-none-any.whl, available at this location at pypi.org.
  • MarkupSafe-1.1.1-cp37-cp37m-manylinux1_x86_64.whl, available at this location at pypi.org.

To upload the required external files:

  1. After downloading the two required external files, SCP the files to the master node.

  2. Run the following commands on the host:

    devpi use 'https://<is_username>:<is_password>@<is_hostip>:3141/isadmin/dependencies'

    devpi login <is_username> --password=<is_password>

    cd /tmp/

    devpi upload Jinja2-2.11.1-py2.py3-none-any.whl

    devpi upload MarkupSafe-1.1.1-cp37-cp37m-manylinux1_x86_64.whl –force

    If you cannot run these commands on the host, you can instead run them on the pypiserver container.

  3. Perform a docker copy to both files (if you are running commands in the pypiserver container):

    docker cp <file1-location> $(docker ps -q -f name=iservices_pypiserver):/tmp

    docker cp <file2-location> $(docker ps -q -f name=iservices_pypiserver):/tmp

  1. Follow the steps in Installing or Upgrading the SyncPack to install and activate this SyncPack.

Installing the "ScienceLogic SL1: Event Integration" Application in ServiceNow

You must install the "ScienceLogic SL1: Event Integration" application on the ServiceNow instance to enable this SyncPack. You must first request the "ScienceLogic SL1: Event Integration" application from the ServiceNow Store, and then you can install it.

The "ScienceLogic SL1: Event Integration" application requires that you have already installed the ServiceNow Event Management plugin on the target ServiceNow instance. You can request this plugin directly from ServiceNow. Also, the MID Server must be configured before you can install this application. For more information, see the ServiceNow Events SyncPack manual.

You must have a ServiceNow HI Service Account to request this application and download it onto your ServiceNow instance.

To request and install the "ScienceLogic SL1: Event Integration" application:

  1. Go to the ServiceNow Store at https://store.servicenow.com and search for "ScienceLogic SL1".
  2. Select the "ScienceLogic SL1: Event Integration" application. The detail page for the application appears.
  3. Click Get and log in with your HI credentials.

  1. After the request is approved, log in to ServiceNow as an administrator and navigate to Application Manager (System Applications > Applications).
  2. Click Downloads in the menu header or search for "ScienceLogic".
  3. Click the version drop-down for the "ScienceLogic SL1: Event Integration" application listing to make sure you are using the correct version of the application that is compatible with your version of the ServiceNow Events SyncPack.
  4. Click Install for the "ScienceLogic SL1: Event Integration" application. The installation is complete when the button changes to Installed.
  5. In the filter navigator, search for "ScienceLogic" and locate the application in the navigation menu in the left pane. You might need to log out of ServiceNow and log in again to see the updated left-hand navigation menu.

For more information about configuring the "ScienceLogic SL1: Event Integration" Application in ServiceNow and enabling Event Sync, see the ServiceNow Events SyncPack manual.

Installing the ServiceNow Base Pack PowerPack in SL1

The ServiceNow Base PackPowerPack version 103 or later contains Run Book Automations that you use to integrate with the ServiceNow Events module.

By default, installing a new version of a PowerPack will overwrite all content in that PowerPack that has already been installed on the target system. You can use the Enable Selective PowerPack Field Protection setting in the Behavior Settings page (System > Settings > Behavior) in SL1 to prevent the new version of the PowerPack from overwriting local changes for some commonly customized fields.

To install the latest "ServiceNow Base Pack" PowerPack in SL1:

  1. If you have not done so already, upgrade your system to the 8.12.2 or later release of SL1.
  2. Search for and download the "ServiceNow Base Pack" PowerPack from the PowerPacks page at the ScienceLogic Support site at https://support.sciencelogic.com/s/.
  3. In SL1, go to the PowerPack Manager page (System > Manage > PowerPacks).
  4. Click the Actions button and choose Import PowerPack. The Import PowerPack modal appears.
  5. Click Browse and navigate to the "ServiceNow Base Pack" PowerPack file from step 1.
  6. Select the PowerPack file and click Import. The PowerPack Installer modal page displays a list of the PowerPack contents.
  7. Click Install. After the installation is complete, the "ServiceNow Base Pack" PowerPack appears on the PowerPack Manager page.

For more information about using the PowerPack, see the ServiceNow Events SyncPack manual.